Headsets

- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 37g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 109g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6|EC44/40 • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.0mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.0mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with straight steerer 1-1/8" forks - Bearing Type: Cartridge - Color: Black - Defined Color: Black - Weight: 171 g -Upper Stack Height: 8 mm - Lower Stack Height: 12 mm - Crown Race: 30 - S.H.I.S Lower: EC44 - S.H.I.S Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cartridge • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 2 mm • S.H.I.S Lower: IS41 • S.H.I.S Upper: IS41 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 7 mm • Weight: 65 g

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.

- Steel cups - Steel retainer bearings - Available in chrome or black - Steerer Dia: 25.4mm - Cup Dia: 30mm

Custom Cane Creek lower race for Salsa.

SRAM's Headset Spacer Set gives you what you need for setting handlebars to the correct height for a custom fit. These lightweight 1 1/8-inch headset spacers feature a carbon finish with stylish SRAM logos. You get two 5mm spacers and one 10mm and 15mm one.

RockShox's Headset Spacer Set is a perfect compliment to your RockShox fork. These lightweight 1 1/8-inch headset spacers feature a carbon finish with stylish RockShox logos. - Black/White Logo: includes 15mm x 1, 10mm x 1, 5mm x 2 - UD Carbon: includes 20mm x 1, 10mm x 1, 5mm x 1, 2.5mm x 2

Ritchey's Comp Logic Zero Press-Fit Headset is compatible with bike frames that accept internal headset cups in tapered head tubes. It's a sleek, low-profile headset made with Ritchey's proven angular-contact bearings, special Ritchey grease and steel cups.

Full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Sealed cartridge bearings - Material: CroMo - Lower Fit (S.H.I.S.): ZS56/40 - Bearing: Ti coated, sealed Cartidge - Weight: 40-52g

Ritchey's Cyclocross Pro Press-Fit Headset is compatible with head tubes that accept internal headset cups. It's a sleek, low-profile headset with an integrated brake cable hanger that will clean up your cable routing. Made with Ritchey's proven angular-contact bearings, special Ritchey grease and aluminum components, this light, durable headset will steer you to the podium.

Ritchey's Cyclocross Pro Press-Fit Headset is compatible with head tubes that accept internal headset cups. It's a sleek, low-profile headset with an integrated brake cable hanger that will clean up your cable routing. Made with Ritchey's proven angular-contact bearings, special Ritchey grease and aluminum and carbon components, this light, durable headset will steer you to the podium.

- Traditional and integrated type replacement headset crown races

The Ritchey Logic Threaded Headset is your go-to headset for threaded steerers. Featuring a smaller upper bearing to save weight, the Logic Threaded headset also features lightweight, precision-machined aluminum cups that are deeper for more confident insertion. - Smaller upper bearing to save weight - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion - Material: CrMo/Plastic - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Ball bearing

The Ritchey Logic Threaded Headset is your go-to headset for threaded steerers. Featuring a smaller upper bearing to save weight, the Logic Threaded headset also features lightweight, precision-machined aluminum cups that are deeper for more confident insertion. - Smaller upper bearing to save weight - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion - Material: CrMo/Plastic - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Ball bearing

The Ritchey Logic Comp threadless headset is constructed of steel and uses replaceable cartridge bearings. • Bearing Type: Cartridge • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 13 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 16.8 mm • Weight: 142 g

1-inch model: • Bearing Type: Cup and Cone • Color: Silver/Black • Crown Race: 26 • Defined Color: Silver • Lower Stack Height: 10.5 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill • Upper Stack Height: 26 mm • Weight: 130 g 1-1/8-inch model: • Bearing Type: Cup and Cone • Color: Silver/Black • Crown Race: 30 • Defined Color: Silver • Lower Stack Height: 10.7 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill • Upper Stack Height: 26 mm • Weight: 140 g

Ritchey's Logic Headset boasts machined aluminum cups for excellent longevity, light weight and super looks. A smaller upper angular cartridge bearing saves weight while a larger lower angular cartridge bearing boosts strength and durability.

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3 or 15.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Lower Fit (S.H.I.S.): IS42/30 - Upper Bearing OD: 41.8 - Lower Bearing OD: 46/42 - Top Cover OD: 46 - Bearings: Sealed cartridge - Weight: 74g

Ritchey's SuperLogic Zero Press Fit Headset is compatible with head tubes that accept internal headset cups. It's a sleek internal headset with Ritchey's proven angular-contact bearings, a special Ritchey grease and aluminum cups for super light weight. For smoothness and durability, the bearings are Ti-coated ceramic hybrids that carry a lifetime guarantee.

Ritchey's Superlogic Zero Press Fit Tapered Headset is compatible with head tubes that accept internal headset cups in tapered head tubes. This slick set features ceramic bearings for the smoothest turns, while the minimal profile keeps your stack height low. It's light, durable, and smooth; you're set.

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g